llvm-svn: 112202

pass that inserted it.

It is no longer necessary to limit the live ranges of FP registers to a single
basic block.

llvm-svn: 108536

operations in x87 code.

llvm-svn: 108098

llvm-svn: 106358

instructions as the Mac OS X darwin assembler.  Some of which like 'fcoml'
assembled to different opcodes.  While some of the suffixes were just different.

llvm-svn: 102958

to input patterns, we can fix X86ISD::CMP and X86ISD::BT as taking
two inputs (which have to be the same type) and *returning an i32*.
This is how the SDNodes get made in the graph, but we weren't able
to model it this way due to deficiencies in the pattern language.

Now we can change things like this:

 def UCOM_FpIr80: FpI_<(outs), (ins RFP80:$lhs, RFP80:$rhs), CompareFP,
-                  [(X86cmp RFP80:$lhs, RFP80:$rhs),
-                   (implicit EFLAGS)]>; // CC = ST(0) cmp ST(i)
+                  [(set EFLAGS, (X86cmp RFP80:$lhs, RFP80:$rhs))]>;

and fix terrible crimes like this:

-def : Pat<(parallel (X86cmp GR8:$src1, 0), (implicit EFLAGS)),
+def : Pat<(X86cmp GR8:$src1, 0),
           (TEST8rr GR8:$src1, GR8:$src1)>;

This relies on matching the result of TEST8rr (which is EFLAGS, which is
an implicit def) to the result of X86cmp, an i32.

llvm-svn: 98903

PR4841.  Patch by Craig Smith!

llvm-svn: 98496

llvm-svn: 97348

redundant with a correct one) pattern that was added for the disassembler.

llvm-svn: 95446

X86 instruction tables.

Also (while I was at it) cleaned up the X86 tables, removing tabs and
80-line violations.

This patch was reviewed by Chris Lattner, but please let me know if
there are any problems.

* X86*.td
	Removed tabs and fixed 80-line violations

* X86Instr64bit.td
	(IRET, POPCNT, BT_, LSL, SWPGS, PUSH_S, POP_S, L_S, SMSW)
		Added
	(CALL, CMOV) Added qualifiers
	(JMP) Added PC-relative jump instruction
	(POPFQ/PUSHFQ) Added qualifiers; renamed PUSHFQ to indicate
		that it is 64-bit only (ambiguous since it has no
		REX prefix)
	(MOV) Added rr form going the other way, which is encoded
		differently
	(MOV) Changed immediates to offsets, which is more correct;
		also fixed MOV64o64a to have to a 64-bit offset
	(MOV) Fixed qualifiers
	(MOV) Added debug-register and condition-register moves
	(MOVZX) Added more forms
	(ADC, SUB, SBB, AND, OR, XOR) Added reverse forms, which
		(as with MOV) are encoded differently
	(ROL) Made REX.W required
	(BT) Uncommented mr form for disassembly only
	(CVT__2__) Added several missing non-intrinsic forms
	(LXADD, XCHG) Reordered operands to make more sense for
		MRMSrcMem
	(XCHG) Added register-to-register forms
	(XADD, CMPXCHG, XCHG) Added non-locked forms
* X86InstrSSE.td
	(CVTSS2SI, COMISS, CVTTPS2DQ, CVTPS2PD, CVTPD2PS, MOVQ)
		Added
* X86InstrFPStack.td
	(COM_FST0, COMP_FST0, COM_FI, COM_FIP, FFREE, FNCLEX, FNOP,
	 FXAM, FLDL2T, FLDL2E, FLDPI, FLDLG2, FLDLN2, F2XM1, FYL2X,
	 FPTAN, FPATAN, FXTRACT, FPREM1, FDECSTP, FINCSTP, FPREM,
	 FYL2XP1, FSINCOS, FRNDINT, FSCALE, FCOMPP, FXSAVE,
	 FXRSTOR)
		Added
	(FCOM, FCOMP) Added qualifiers
	(FSTENV, FSAVE, FSTSW) Fixed opcode names
	(FNSTSW) Added implicit register operand
* X86InstrInfo.td
	(opaque512mem) Added for FXSAVE/FXRSTOR
	(offset8, offset16, offset32, offset64) Added for MOV
	(NOOPW, IRET, POPCNT, IN, BTC, BTR, BTS, LSL, INVLPG, STR,
	 LTR, PUSHFS, PUSHGS, POPFS, POPGS, LDS, LSS, LES, LFS,
	 LGS, VERR, VERW, SGDT, SIDT, SLDT, LGDT, LIDT, LLDT,
	 LODSD, OUTSB, OUTSW, OUTSD, HLT, RSM, FNINIT, CLC, STC,
	 CLI, STI, CLD, STD, CMC, CLTS, XLAT, WRMSR, RDMSR, RDPMC,
	 SMSW, LMSW, CPUID, INVD, WBINVD, INVEPT, INVVPID, VMCALL,
	 VMCLEAR, VMLAUNCH, VMRESUME, VMPTRLD, VMPTRST, VMREAD,
	 VMWRITE, VMXOFF, VMXON) Added
	(NOOPL, POPF, POPFD, PUSHF, PUSHFD) Added qualifier
	(JO, JNO, JB, JAE, JE, JNE, JBE, JA, JS, JNS, JP, JNP, JL,
	 JGE, JLE, JG, JCXZ) Added 32-bit forms
	(MOV) Changed some immediate forms to offset forms
	(MOV) Added reversed reg-reg forms, which are encoded
		differently
	(MOV) Added debug-register and condition-register moves
	(CMOV) Added qualifiers
	(AND, OR, XOR, ADC, SUB, SBB) Added reverse forms, like MOV
	(BT) Uncommented memory-register forms for disassembler
	(MOVSX, MOVZX) Added forms
	(XCHG, LXADD) Made operand order make sense for MRMSrcMem
	(XCHG) Added register-register forms
	(XADD, CMPXCHG) Added unlocked forms
* X86InstrMMX.td
	(MMX_MOVD, MMV_MOVQ) Added forms
* X86InstrInfo.cpp: Changed PUSHFQ to PUSHFQ64 to reflect table
	change

* X86RegisterInfo.td: Added debug and condition register sets
* x86-64-pic-3.ll: Fixed testcase to reflect call qualifier
* peep-test-3.ll: Fixed testcase to reflect test qualifier
* cmov.ll: Fixed testcase to reflect cmov qualifier
* loop-blocks.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-11.ll: Fixed testcase to reflect call qualifier
* 2009-11-04-SubregCoalescingBug.ll: Fixed testcase to reflect call
  qualifier
* x86-64-pic-2.ll: Fixed testcase to reflect call qualifier
* live-out-reg-info.ll: Fixed testcase to reflect test qualifier
* tail-opts.ll: Fixed testcase to reflect call qualifiers
* x86-64-pic-10.ll: Fixed testcase to reflect call qualifier
* bss-pagealigned.ll: Fixed testcase to reflect call qualifier
* x86-64-pic-1.ll: Fixed testcase to reflect call qualifier
* widen_load-1.ll: Fixed testcase to reflect call qualifier

llvm-svn: 91638

bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.

llvm-svn: 85517

covered by other definitions.

llvm-svn: 81992

All of these do not have patterns (they're for the
disassembler).

Many of the floating-point instructions will probably
be rolled into definitions that have patterns, and may
eventually be superseded by mdefs.  So I put them
together and left a comment.

llvm-svn: 81979

llvm-svn: 64186

llvm-svn: 60487

llvm's output .s files will go through gcc -std=c99
without triggering preprocesser errors.  Approach
suggested by Daveed Vandevoorde.

llvm-svn: 48808

x86-64 return conventions correct, but was never enabled.
We can now do the "right thing" with multiple return values.

llvm-svn: 48635

ST(0)/ST(1).

llvm-svn: 48634

copyfromreg/copytoreg instead.

llvm-svn: 48174

llvm-svn: 48094

isel'ing value preserving FP roundings from one fp stack reg to another
into a noop, instead of stack traffic.

llvm-svn: 48093

Work in progress. This patch *fixes* x86-64 calls which are modelled as StructRet but really should be return in registers, e.g. _Complex long double, some 128-bit aggregates. This is a short term solution that is necessary only because llvm, for now, cannot model i128 nor call's with multiple results.
Status: This only works for direct calls, and only the caller side is done. Disabled for now.

llvm-svn: 46527

llvm-svn: 45860

x86 backend where instructions were not marked maystore/mayload, and perf issues where
instructions were not marked neverHasSideEffects.  It would be really nice if we could
write patterns for copy instructions.

I have audited all the x86 instructions down to MOVDQAmr.  The flags on others and on
other targets are probably not right in all cases, but no clients currently use this
info that are enabled by default.

llvm-svn: 45829

inferred from the instr patterns.

llvm-svn: 45824

llvm-svn: 45821

llvm-svn: 45667

llvm-svn: 45418

based what flag to set on whether it was already marked as
"isRematerializable". If there was a further check to determine if it's "really"
rematerializable, then I marked it as "mayHaveSideEffects" and created a check
in the X86 back-end similar to the remat one.

llvm-svn: 45132

llvm-svn: 45128

llvm-svn: 44183

for fastcc from X86CallingConv.td.  This means that nested functions
are not supported for calling convention 'fastcc'.

llvm-svn: 42934

llvm-svn: 42459

llvm-svn: 42312

Added support for new condition code modeling scheme (i.e. physical register dependency). These are a bunch of instructions that are duplicated so the x86 backend can support both the old and new schemes at the same time. They will be deleted after
all the kinks are worked out.

llvm-svn: 42285

keep f32 in SSE registers and f64 in x87.  This
is effectively a new codegen mode.
Change addLegalFPImmediate to permit float and
double variants to do different things.
Adjust callers.

llvm-svn: 42246

llvm-svn: 41962

llvm-svn: 41863

llvm-svn: 41595

SSE mode (all but conversions <-> other FP types, I think):
>>Do not mark all-80-bit operations as "Requires[FPStack]"
(which really means "not SSE").
>>Refactor load-and-extend to facilitate this.
>>Update comments.
>>Handle long double in SSE when computing FP_REG_KILL.

llvm-svn: 40906