All insertf*/extractf* functions replaced with insert/extract since we have insertf and inserti forms.
Added lowering for INSERT_VECTOR_ELT / EXTRACT_VECTOR_ELT for 512-bit vectors.
Added lowering for EXTRACT/INSERT subvector for 512-bit vectors.
Added a test.

llvm-svn: 187491

in-tree implementations of TargetLoweringBase::isFMAFasterThanMulAndAdd in
order to resolve the following issues with fmuladd (i.e. optional FMA)
intrinsics:

1. On X86(-64) targets, ISD::FMA nodes are formed when lowering fmuladd
intrinsics even if the subtarget does not support FMA instructions, leading
to laughably bad code generation in some situations.

2. On AArch64 targets, ISD::FMA nodes are formed for operations on fp128,
resulting in a call to a software fp128 FMA implementation.

3. On PowerPC targets, FMAs are not generated from fmuladd intrinsics on types
like v2f32, v8f32, v4f64, etc., even though they promote, split, scalarize,
etc. to types that support hardware FMAs.

The function has also been slightly renamed for consistency and to force a
merge/build conflict for any out-of-tree target implementing it. To resolve,
see comments and fixed in-tree examples.

llvm-svn: 185956

llvm-svn: 184642

the internals of TargetMachine could change.

No functionality change intended.

llvm-svn: 183571

Change SelectionDAG::getXXXNode() interfaces as well as call sites of
these functions to pass in SDLoc instead of DebugLoc.

llvm-svn: 182703

llvm-svn: 182180

During LTO, the target options on functions within the same Module may
change. This would necessitate resetting some of the back-end. Do this for X86,
because it's a Friday afternoon.

llvm-svn: 178917

llvm-svn: 178314

llvm-svn: 178083

- ISD::SHL/SRL/SRA must have either both scalar or both vector operands
  but TLI.getShiftAmountTy() so far only return scalar type. As a
  result, backend logic assuming that breaks.
- Rename the original TLI.getShiftAmountTy() to
  TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to
  return target-specificed scalar type or the same vector type as the
  1st operand.
- Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar
  type.

llvm-svn: 176364

llvm-svn: 175220

conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
   the target provides a sincos library call.

Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.

rdar://13087969
PR13204

llvm-svn: 173755

llvm-svn: 173667

llvm-svn: 173005

Capitalize lowerTRUNCATE so that it matches the other lower functions in this file despite it not matching coding standards.

llvm-svn: 172994

llvm-svn: 172969

llvm-svn: 172936

llvm-svn: 172927

PR 14848. The lowered sequence is based on the existing sequence the target-independent
DAG Combiner creates for the scalar case.

Patch by Zvi Rackover.

llvm-svn: 171953

a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.

The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.

The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.

The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.

The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.

The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.

The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.

The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.

Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.

Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.

Commits to update DragonEgg and Clang will be made presently.

llvm-svn: 171681

1. Add code to estimate register pressure.
2. Add code to select the unroll factor based on register pressure.
3. Add bits to TargetTransformInfo to provide the number of registers.

llvm-svn: 171469

In order to cost subvector insertion and extraction, we need to know
the type of the subvector being extracted.

No functionality change.

llvm-svn: 171453

llvm-svn: 171180

AVX: Move the ZEXT/ANYEXT DAGCo optimizations to the lowering of these optimizations. The old test cases still cover all of these lowering/optimizations. The single change that we have is that now anyext does not need to zero a register, because it does not use the exact code path as the zero_extend.

llvm-svn: 171178

llvm-svn: 171170

This is very mechanical, no functionality change. Preparation for PR14667.

llvm-svn: 170898

llvm-svn: 170842

llvm-svn: 170830

MVTs, instead of EVTs.

llvm-svn: 170537

of EVT.

llvm-svn: 170532

Simplify BMI ANDN matching to use patterns instead of a DAG combine. Also add ANDN to isDefConvertible.

llvm-svn: 170305

We match the pattern "x >= y ? x-y : 0" into "subus x, y" and two special cases
if y is a constant. DAGCombiner canonicalizes those so we first have to undo the
canonicalization for those cases. The pattern occurs in gzip when the loop
vectorizer is enabled. Part of PR14613.

llvm-svn: 170273

mention the inline memcpy / memset expansion code is a mess?

This patch split the ZeroOrLdSrc argument into two: IsMemset and ZeroMemset.
The first indicates whether it is expanding a memset or a memcpy / memmove.
The later is whether the memset is a memset of zero. It's totally possible
(likely even) that targets may want to do different things for memcpy and
memset of zero.

llvm-svn: 169959

Also added more comments to explain why it is generally ok to return true.
- Rename getOptimalMemOpType argument IsZeroVal to ZeroOrLdSrc. It's meant to
be true for loaded source (memcpy) or zero constants (memset). The poor name
choice is probably some kind of legacy issue.

llvm-svn: 169954

f64 load / store on non-SSE2 x86 targets.

llvm-svn: 169944

llvm-svn: 169854

MVTs, instead of EVTs.

Accordingly, add bitsLT (and similar) to MVT.

llvm-svn: 169850

of EVT.

llvm-svn: 169845

1. Teach it to use overlapping unaligned load / store to copy / set the trailing
   bytes. e.g. On 86, use two pairs of movups / movaps for 17 - 31 byte copies.
2. Use f64 for memcpy / memset on targets where i64 is not legal but f64 is. e.g.
   x86 and ARM.
3. When memcpy from a constant string, do *not* replace the load with a constant
   if it's not possible to materialize an integer immediate with a single
   instruction (required a new target hook: TLI.isIntImmLegal()).
4. Use unaligned load / stores more aggressively if target hooks indicates they
   are "fast".
5. Update ARM target hooks to use unaligned load / stores. e.g. vld1.8 / vst1.8.
   Also increase the threshold to something reasonable (8 for memset, 4 pairs
   for memcpy).

This significantly improves Dhrystone, up to 50% on ARM iOS devices.

rdar://12760078

llvm-svn: 169791

- fix a bug which cause sigfault.
- add two testing cases which was causing crash

llvm-svn: 169687