llvm-svn: 46159

llvm-svn: 46058

some code.  No functionality change.

llvm-svn: 46055

llvm-svn: 46015

as well as PPC codegen

llvm-svn: 46001

unifying the copied algorithms and saving over 500 LOC. There should
be no functionality change, but please test on your favorite x86
target.

llvm-svn: 45627

llvm-svn: 45418

llvm-svn: 45024

1) Change the interface to TargetLowering::ExpandOperationResult to 
   take and return entire NODES that need a result expanded, not just
   the value.  This allows us to handle things like READCYCLECOUNTER,
   which returns two values.
2) Implement (extremely limited) support in LegalizeDAG::ExpandOp for MERGE_VALUES.
3) Reimplement custom lowering in LegalizeDAGTypes in terms of the new
   ExpandOperationResult.  This makes the result simpler and fully 
   general.
4) Implement (fully general) expand support for MERGE_VALUES in LegalizeDAGTypes.
5) Implement ExpandOperationResult support for ARM f64->i64 bitconvert and ARM
   i64 shifts, allowing them to work with LegalizeDAGTypes.
6) Implement ExpandOperationResult support for X86 READCYCLECOUNTER and FP_TO_SINT,
   allowing them to work with LegalizeDAGTypes.

LegalizeDAGTypes now passes several more X86 codegen tests when enabled and when
type legalization in LegalizeDAG is ifdef'd out.

llvm-svn: 44300

llvm-svn: 44183

Then:
        call    "L1$pb"
"L1$pb":
        popl    %eax
		...
LBB1_1: # entry
        imull   $4, %ecx, %ecx
        leal    LJTI1_0-"L1$pb"(%eax), %edx
        addl    LJTI1_0-"L1$pb"(%ecx,%eax), %edx
        jmpl    *%edx

        .align  2
        .set L1_0_set_3,LBB1_3-LJTI1_0
        .set L1_0_set_2,LBB1_2-LJTI1_0
        .set L1_0_set_5,LBB1_5-LJTI1_0
        .set L1_0_set_4,LBB1_4-LJTI1_0
LJTI1_0:
        .long    L1_0_set_3
        .long    L1_0_set_2

Now:
        call    "L1$pb"
"L1$pb":
        popl    %eax
		...
LBB1_1: # entry
        addl    LJTI1_0-"L1$pb"(%eax,%ecx,4), %eax
        jmpl    *%eax

		.align  2
		.set L1_0_set_3,LBB1_3-"L1$pb"
		.set L1_0_set_2,LBB1_2-"L1$pb"
		.set L1_0_set_5,LBB1_5-"L1$pb"
		.set L1_0_set_4,LBB1_4-"L1$pb"
LJTI1_0:
        .long    L1_0_set_3
        .long    L1_0_set_2

llvm-svn: 43924

Thanks for the suggestions Bill :-)

llvm-svn: 43742

transformation. Previously, it's restricted by ensuring the number of load uses
is one. Now the restriction is loosened up by allowing setcc uses to be
"extended" (e.g. setcc x, c, eq -> setcc sext(x), sext(c), eq).

llvm-svn: 43465

Loosen up iv reuse to allow reuse of the same stride but a larger type when truncating from the larger type to smaller type is free.
e.g.
Turns this loop:
LBB1_1: # entry.bb_crit_edge
        xorl    %ecx, %ecx
        xorw    %dx, %dx
        movw    %dx, %si
LBB1_2: # bb
        movl    L_X$non_lazy_ptr, %edi
        movw    %si, (%edi)
        movl    L_Y$non_lazy_ptr, %edi
        movw    %dx, (%edi)
		addw    $4, %dx
		incw    %si
		incl    %ecx
		cmpl    %eax, %ecx
		jne     LBB1_2  # bb
	
into

LBB1_1: # entry.bb_crit_edge
        xorl    %ecx, %ecx
        xorw    %dx, %dx
LBB1_2: # bb
        movl    L_X$non_lazy_ptr, %esi
        movw    %cx, (%esi)
        movl    L_Y$non_lazy_ptr, %esi
        movw    %dx, (%esi)
        addw    $4, %dx
		incl    %ecx
        cmpl    %eax, %ecx
        jne     LBB1_2  # bb

llvm-svn: 43375

enabled by passing -tailcallopt to llc.  The optimization is
performed if the following conditions are satisfied:
* caller/callee are fastcc
* elf/pic is disabled OR
  elf/pic enabled + callee is in module + callee has
  visibility protected or hidden

llvm-svn: 42870

llvm-svn: 42787

use ISD::{S,U}DIVREM and ISD::{S,U}MUL_HIO. Move the lowering code
associated with these operators into target-independent in LegalizeDAG.cpp
and TargetLowering.cpp.

llvm-svn: 42762

llvm-svn: 42459

The only generated code difference is that now we call memcpy when
the size of the array is unknown. This matches GCC behavior and is
better since the run time value can be arbitrarily large.

llvm-svn: 42433

llvm-svn: 42313

both results with a single div or idiv instruction. This uses new X86ISD
nodes for DIV and IDIV which are introduced during the legalize phase
so that the SelectionDAG's CSE can automatically eliminate redundant
computations.

llvm-svn: 42308

Added support for new condition code modeling scheme (i.e. physical register dependency). These are a bunch of instructions that are duplicated so the x86 backend can support both the old and new schemes at the same time. They will be deleted after
all the kinks are worked out.

llvm-svn: 42285

keep f32 in SSE registers and f64 in x87.  This
is effectively a new codegen mode.
Change addLegalFPImmediate to permit float and
double variants to do different things.
Adjust callers.

llvm-svn: 42246

llvm-svn: 42037

llvm-svn: 41953

llvm-svn: 41643

changing the interface to allow for future changes.

llvm-svn: 41384

hard to catch bugs with retaddr lowering

llvm-svn: 41104

llvm-svn: 40757

llvm-svn: 40566

Make the alignedload and alignedstore patterns always require 16-byte
alignment. This way when they are used in the "Fs" instructions, in which
a vector instruction is used for a scalar purpose, they can still require
the full vector alignment. And add a regression test for this.

llvm-svn: 40555

llvm-svn: 40547

x86 target, replacing them with the new alignment attributes on memory
references.

llvm-svn: 40504

This patch fills the last necessary bits to enable exceptions
handling in LLVM. Currently only on x86-32/linux.

In fact, this patch adds necessary intrinsics (and their lowering) which
represent really weird target-specific gcc builtins used inside unwinder.

After corresponding llvm-gcc patch will land (easy) exceptions should be
more or less workable. However, exceptions handling support should not be 
thought as 'finished': I expect many small and not so small glitches
everywhere.

llvm-svn: 39855

in addition to the intrinsic forms. Add spill-folding entries for these new
instructions, and for the scalar min and max instrinsic instructions which
were missing. And add some preliminary ISelLowering code for using the new
non-intrinsic vector sqrt instruction, and fneg and fabs.

llvm-svn: 38478

TargetLowering to SelectionDAG so that they have more convenient
access to the current DAG, in preparation for the ValueType routines
being changed from standalone functions to members of SelectionDAG for
the pre-legalize vector type changes.

llvm-svn: 37704

        vector_shuffle v1, v2, <2, 6, 3, 7>

I.e.

         vector_shuffle v, undef, <2, 2, 3, 3>

MMX only has a shuffle for v4i16 vectors. It needs to use the unpackh for
this type of operation.

llvm-svn: 36403

X86 32 bits.

llvm-svn: 36283

Also, fixed static case in presence of eax livin. This fixes PR331

PS: Why don't we still have push/pop instructions? :)
llvm-svn: 36195

llvm-svn: 35845