Differential revision: https://reviews.llvm.org/D22896

llvm-svn: 277093

OS X 10.11 has a feature named System Integrity Protection. The goal of the feature is to make system binaries immutable (even as root). One part of this is that protected binaries do not receive DYLD_* environment variables because the kernel scrubs them before process launch.

This causes problems for LTO bootstrap builds on Darwin that try to use the just-built libLTO with the host ar, ranlib, or libtool.

This patch addresses two problems.

(1) The tools themselves aren't protected binaries but the shim tools installed at / are, so we need to call xcrun -find to find libtool instead of using the one CMake finds.

(2) Some build tools (ninja and make) use /bin/sh to invoke their subprocesses. Since /bin/sh is a system binary, the kernel scrubs the DYLD envars from their environment. To work around this we need to set the environment variables as part of the archiver commands, so the envars are set by the shell process instead of on the shell process.

llvm-svn: 276710

It's been pointed out that arbitrarily spraying raw profiles into a
build directory is insane. Doing this wastes a tremendous amount of
space and is also very lossy, since the test harness tends to wipe away
temporary sub-directories (which usually contain relevant profile data).

The new default is a `profiles` directory inside of the build dir.

llvm-svn: 276504

[cmake] Move the including of utils/unittests under LLVM_INCLUDE_UTILS instead of LLVM_INCLUDE_TESTS.

This does not change anything by default since LLVM_INCLUDE_UTILS is already set
to TRUE by default. In addition, since LLVM_INCLUDE_TESTS => LLVM_INCLUDE_UTILS,
the only way that this can cause changes is in the case where LLVM_INCLUDE_UTILS
is set to TRUE, but LLVM_INCLUDE_TESTS is FALSE. In that case, building gtest is
not a huge cost.

The reason to do this is that without this change, one can not turn off
LLVM_INCLUDE_TESTS in downstream projects that also use gtest for unittests. It
also just in general makes more sense since LLVM_INCLUDE_UTILS gates FileCheck
and other utilities that are along the lines of gtest.

Additionally from talking with chandlerc, this was not done for any specific
reason, so there is no reason not to do it and lots of benefit to doing it.

llvm-svn: 276342

Previously LLVM_BUILD_GLOBAL_ISEL was a boolean variable and although,
this is strictly identical to an option, it did not convey the
information that the user may set it. Options are here for that.

llvm-svn: 276306

Patch by Andrew Paprocki!

Differential Revision: https://reviews.llvm.org/D18359

llvm-svn: 276045

Differential Revision: https://reviews.llvm.org/D21821

llvm-svn: 275827

This option is the equivalent option to LLVM_BUILD_TOOLS but for executables
created via add_llvm_utility.

This is a useful tool for improving compile time in situations where LLVM is
used as a library and no testing tools are needed.

It follows the exact same implemention model as LLVM_BUILD_TOOLS.

Since the option is by default set to on, no behavior is changed unless one sets
it from the command line to be false.

llvm-svn: 275007

When compiling with modules, header A and B can be in the same module M.
B depends on intrinsics_gen and A doesn't. Compiling a source file #include-ing
header A, we implicitly request module M to be built. It puts header A and B in
the same TU and tries to build them. Since B depends on intrinsics_gen (which
might not be built yet) we run into build failures.

This should fix our modules buildbot.

Patch reviewed by Chris Bieneman.

llvm-svn: 274270

This flag is only effective in builds with debug info and modules.
The default is On for Darwin only.

rdar://problem/27019000

llvm-svn: 274244

On Darwin it is currently impossible to build LLVM with modules
because the Darwin system module map is not compatible with
-fmodules-local-submodule-visibility at this point in time.  This
patch makes the flag optional and off by default on Darwin so it
becomes possible to build LLVM with modules again.

http://reviews.llvm.org/D21827
rdar://problem/27019000

llvm-svn: 274196

Summary:
There are a few LLVM projects that produce runtime libraries. Ideally
runtime libraries should be built differently than other projects,
specifically they should be built using the just-built toolchain.

There is support for building compiler-rt in this way from the clang
build. Moving this logic into the LLVM build is interesting because it
provides a simpler way to extend the just-built toolchain to include
LLD and the LLVM object file tools.

Once this functionality is better fleshed out and tested we’ll want to
encapsulate it in a module that can be used for clang standalone
builds, and we’ll want to make it the default way to build compiler-rt.

With this patch applied there is no immediate change in the build.
Moving compiler-rt out from llvm/projects into llvm/runtimes enables
the functionality.

This code has a few improvements over the method provided by
LLVM_BUILD_EXTERNAL_COMPILER_RT. Specifically the sub-ninja command is
always invoked, so changes to compiler-rt source files will get built
properly, so this patch can be used for iterative development with
just-built tools.

This first patch only works with compiler-rt. Support for other
runtime projects will be coming in follow-up patches.

Reviewers: chandlerc, bogner

Subscribers: kubabrecka, llvm-commits

Differential Revision: http://reviews.llvm.org/D20992

llvm-svn: 273620

Differential Revision: http://reviews.llvm.org/D20993

llvm-svn: 272599

This just removes some redundant checks and updates warning text.

llvm-svn: 272218

Now that we are on CMake 3.4.3 we no longer need a version check around this.

llvm-svn: 272211

This patch adds a new option LLVM_TOOLS_INSTALL_DIR which allows customizing the location executables and symlinks get installed to. This adds the functionality provided by autoconf's --bindir flag.

This patch is based on patches from and collaboration with Tony Kelman, and replaces http://reviews.llvm.org/D20934.

llvm-svn: 272200

Summary:
This is as per the discussions on developer lists:

http://lists.llvm.org/pipermail/llvm-dev/2016-April/098780.html
http://lists.llvm.org/pipermail/llvm-dev/2016-May/100058.html

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D20822

llvm-svn: 271325

Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.

The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.

With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.

See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html

Reviewers: bogner, silvas, rnk

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D19892

llvm-svn: 268670

This backend was supposed to generate C++ code which will re-construct
the LLVM IR passed as input. This seems to me to have very marginal
usefulness in the first place.

However, the code has never been updated to use IRBuilder, which makes
its current value negative -- people who look at the output may be
steered to use the *wrong* C++ APIs to construct IR.

Furthermore, it's generated code that doesn't compile since at least
2013.

Differential Revision: http://reviews.llvm.org/D19942

llvm-svn: 268631

Summary:
Before this change certain Polly variables have been used both as user-facing
CACHED cmake variables as well as uncached internal variables. Even though
this seems to have worked OK in practice, the behavior only worked due to
one variable shadowing the other. This behavior has been found confusing.
To make the use of cmake variables more clear we now prefix the cached, user
facing variables with LLVM_ as it is common habit for LLVM options and also
moved the _POLLY_ term to the beginning to ensure related options are sorted
after each other. The variables that control the behavior of LLVM/Polly are then
set by forwarding the values set in the user facing option variables.
As a result, Polly is now enabled with LLVM_POLLY_BUILD instead of BUILD_POLLY
and the linking behavior of Polly is controlled with LLVM_POLLY_LINK_INTO_TOOLS
instead of LINK_POLLY_INTO_TOOLS.

Reviewers: bogner, Meinersbur

Subscribers: pollydev, llvm-commits

Differential Revision: http://reviews.llvm.org/D19907

llvm-svn: 268537

This change is based on the discussion from http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html.

The goal is to make the default LLVM configuration build deterministically.

llvm-svn: 268441

Unify XDEBUG and EXPENSIVE_CHECKS (into the latter), and add an option to the cmake build to enable them.

Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.

This will also make it easier to turn it on in buildbots.

Reviewers: chandlerc

Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits

Differential Revision: http://reviews.llvm.org/D19723

llvm-svn: 268050

This is the second try. This time we disable this feature if no Polly checkout
is available. For this to work we need to check if tools/polly is present
early enough that our decision is known before cmake generates Config/config.h.

With Polly checked into LLVM it was since a long time possible to compile
clang/opt/bugpoint with Polly support directly linked in, instead of only
providing Polly as a separate loadable module. This commit switches the
default from providing Polly as a module to linking Polly into tools, such
that it becomes unnecessary to load the Polly module when playing with Polly.
Such configuration has shown a lot more convenient for day-to-day Polly use.

This change does not impact the default behavior of any tool, if Polly is not
explicitly enabled when calling clang/opt/bugpoint Polly does not affect
compilation.

This change also does not impact normal LLVM/clang checkouts that do not
contain Polly.

Reviewers: jdoerfert, Meinersbur

Subscribers: pollydev, llvm-commits

Differential Revision: http://reviews.llvm.org/D19711

llvm-svn: 268048

This reverts commit r268033 as it breaks some buildbots.

llvm-svn: 268035

With Polly checked into LLVM it was since a long time possible to compile
clang/opt/bugpoint with Polly support directly linked in, instead of only
providing Polly as a separate loadable module. This commit switches the
default from providing Polly as a module to linking Polly into tools, such
that it becomes unnecessary to load the Polly module when playing with Polly.
Such configuration has shown a lot more convenient for day-to-day Polly use.

This change does not impact the default behavior of any tool, if Polly is not
explicitly enabled when calling clang/opt/bugpoint Polly does not affect
compilation.

This change also does not impact normal LLVM/clang checkouts that do not
contain Polly.

Reviewers: jdoerfert, Meinersbur, sebpop, etherzhhb, zinob, hiraditya

Subscribers: pollydev, llvm-commits

Differential Revision: http://reviews.llvm.org/D19711

llvm-svn: 268033

Summary: Using libtool instead of ar and ranlib on Darwin shaves a minute off my clang build. This is because on Darwin libtool is optimized to give hints to the kernel about filesystem interactions that allow it to be faster.

Reviewers: bogner, pete

Subscribers: llvm-commits

Differential Revision: http://reviews.llvm.org/D19611

llvm-svn: 267930

Moving llvm-test-depends and test-depends into the Tests folder; NFC, this simply cleans up the generated solution so that these targets don't live in the root folder of the IDE.

llvm-svn: 266078

The sign now reads "0 days since the last line ending confusion"

llvm-svn: 264609

llvm-svn: 264602

If anybody is actually using this, it probably doesn't do what they
think it does. This actually causes the dylib to *export* a
__cxa_atexit symbol, so anything that links it probably loses their
exit time destructors as well as disabling LLVM's.

This just removes the option entirely. If somebody does need this
behaviour we should figure out a more principled way to do it.

This is effectively a revert of r223805.

llvm-svn: 263498

This is just another convenience target for bots to use. It enables isolation of building and testing.

llvm-svn: 262494

This is just a convenience target to allow limiting what you build.

llvm-svn: 262427

This allows a user to specify "Native" as a target when configuring LLVM. Native will resolve to the LLVM_NATIVE_ARCH, which is the target that supports code generation for the host.

llvm-svn: 262070

The idea here is to provide a customizable install target that only depends on building the things you actually want to install. It relies on each component being installed having an auto-generated install-${component}, which in turn depends only on the target being installed.

This is fundamentally a workaround for the fact that CMake generates build files which have their "install" target depend on the "all" target. This results in "ninja install" building a bunch of unneeded things.

llvm-svn: 261681

Summary:
PR26666: CMAKE_BUILD_TYPE was previously being reset to blank.

Reviewers: rnk, beanz

Subscribers: llvm-commits

Patch By: Derek Bruening

Differential Revision: http://reviews.llvm.org/D17398

llvm-svn: 261273

LLVM_BUILD_GLOBAL_ISEL

llvm-svn: 260457

This patch adds the necessary plumbing to cmake to build the sources related to
GlobalISel.

To build the sources related to GlobalISel, we need to add -DBUILD_GLOBAL_ISEL=ON.
By default, this is OFF, thus GlobalISel sources will not impact people that do
not explicitly opt-in.

Differential Revision: http://reviews.llvm.org/D15983

llvm-svn: 258344

llvm-svn: 257627

This reverts r257221.

This caused several build bot failures

* It looks like some of the tests don't work correctly under Windows
* It looks like the lit per test timeout tests fail

So I'm reverting for now. Once the above failures are fixed running
lit's tests can be enabled again.

llvm-svn: 257268

directy with ``make check-lit`` and are run as part of
``make check-all``.

In principle we should run lit's testsuite before testing LLVM using lit
so that any problems with lit get discovered before testing LLVM so we
can bail out early.  However this implementation (``check-all`` runs all
tests together) seemed simpler and will still report failing lit tests.

Note that the tests and the configured ``lit.site.cfg`` have to be
copied into the build directory to avoid polluting the source tree.

llvm-svn: 257221