Reverting because of failed tests.

llvm-svn: 264577

Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
 (required) code to support target specific codegen.

llvm-svn: 264576

Differential Revision: http://reviews.llvm.org/D17905

llvm-svn: 264575

getexp{sd|ss} getmant{sd|ss} kunpck{di|si} loada{pd|ps} loaddqu{di|hi|qi|si} max{sd|ss} min{sd|ss} kmov16 builtins to clang


Differential Revision: http://reviews.llvm.org/D18215

llvm-svn: 264574

llvm-svn: 264573

We require C++11 to build, so remove a few remaining preprocessor checks for
'__cplusplus >= 201103L'. This should always be true.

llvm-svn: 264572

Fix-up for OS X test failure after r264451 ("Add memset, memmove, and memcpy to the common interceptors")

llvm-svn: 264571

This reverts commit 3ee791165100607178073f14531a0dc90c622b36.

llvm-svn: 264570

Solution unifies interface of RegionCodeGenTy type to allow insert
runtime-specific code before/after main codegen action defined in
CGStmtOpenMP.cpp file. Runtime should not define its own RegionCodeGenTy
for general OpenMP directives, but must be allowed to insert its own
  (required) code to support target specific codegen.

llvm-svn: 264569

This patch implements the following altivec instructions:

- Decimal Convert From/to National/Zoned/Signed-QWord:
    bcdcfn. bcdcfz. bcdctn. bcdctz. bcdcfsq. bcdctsq.

- Decimal Copy-Sign/Set-Sign:
    bcdcpsgn. bcdsetsgn.

- Decimal Shift/Unsigned-Shift/Shift-and-Round:
    bcds. bcdus. bcdsr.

- Decimal (Unsigned) Truncate:
    bcdtrunc. bcdutrunc.

Total 13 instructions

Thanks Amehsan's advice! Thanks Kit's great help!
Reviewers: hal, nemanja, kbarton, tjablin, amehsan

http://reviews.llvm.org/D17838

llvm-svn: 264568

[Power9] Implement new vsx instructions: insert, extract, test data class, min/max, reverse, permute, splat

This change implements the following vsx instructions:

- Scalar Insert/Extract
    xsiexpdp xsiexpqp xsxexpdp xsxsigdp xsxexpqp xsxsigqp

- Vector Insert/Extract
    xviexpdp xviexpsp xvxexpdp xvxexpsp xvxsigdp xvxsigsp
    xxextractuw xxinsertw

- Scalar/Vector Test Data Class
    xststdcdp xststdcsp xststdcqp
    xvtstdcdp xvtstdcsp

- Maximum/Minimum
    xsmaxcdp xsmaxjdp
    xsmincdp xsminjdp

- Vector Byte-Reverse/Permute/Splat
    xxbrd xxbrh xxbrq xxbrw
    xxperm xxpermr
    xxspltib

30 instructions

Thanks Nemanja for invaluable discussion! Thanks Kit's great help!
Reviewers: hal, nemanja, kbarton, tjablin, amehsan

http://reviews.llvm.org/D16842

llvm-svn: 264567

ICMP instruction selection fails on SKX and KNL for i1 operand.
I use XOR to resolve:
(A == B) is equivalent to (A xor B) == 0

Differential Revision: http://reviews.llvm.org/D18511

llvm-svn: 264566

This change implements the following vsx instructions:

- quad-precision move
    xscpsgnqp, xsabsqp, xsnegqp, xsnabsqp

- quad-precision fp-arithmetic
    xsaddqp(o) xsdivqp(o) xsmulqp(o) xssqrtqp(o) xssubqp(o)
    xsmaddqp(o) xsmsubqp(o) xsnmaddqp(o) xsnmsubqp(o)

22 instructions

Thanks Nemanja and Kit for careful review and invaluable discussion!
Reviewers: hal, nemanja, kbarton, tjablin, amehsan

http://reviews.llvm.org/D16110

llvm-svn: 264565

value that can convert to the enum's underlying type.

llvm-svn: 264564

VS 2013 does not support char16_t or char32_t

llvm-svn: 264563

I broke this back in r264529 because I forgot to serialize the UuidAttr
member.  Fix this by replacing the UuidAttr with a StringRef which is
properly serialized and deserialized.

llvm-svn: 264562

llvm-svn: 264561

llvm-svn: 264560

When emitting coverage mappings for functions with local linkage and an
unknown filename, we use "<unknown>:func" for the PGO function name. The
problem is that we don't strip "<unknown>" from the name when loading
coverage data, like we do for other file names. Fix that and add a test.

llvm-svn: 264559

The caller of ValueEnumerator::EnumerateOperandType never sends in
metadata.  Assert that, and remove the unnecessary logic.

llvm-svn: 264558

Change writeFunctionMetadata to call writeMetadataRecords.  For now
there's no functionality change, but makes it easy to serialize other
types of metadata in the function block in the future.

llvm-svn: 264557

To match writeMetadataRecords, writeNamedMetadata and
writeMetadataStrings, change:

    WriteModuleMetadata        => writeModuleMetadata
    WriteFunctionLocalMetadata => writeFunctionMetadata
    Write##CLASS               => write##CLASS

The only major change is "FunctionLocal" => "Function".  The point is to
be less specific, in preparation for emitting normal metadata records
inside function metadata blocks (currently we only emit
`LocalAsMetadata` there).

llvm-svn: 264556

Besides being a nice cleanup, this is preparation for reusing the code
in function metadata blocks.

llvm-svn: 264555

Use an early return to simplify logic.

llvm-svn: 264554

make_unique => llvm::make_unique

llvm-svn: 264553

We don't really need a separate vector here; instead, point at a range
inside the main MDs array.  This matches how r264551 references the
ranges of strings and non-strings.

llvm-svn: 264552

Spiritually reapply commit r264409 (reverted in r264410), albeit with a
bit of a redesign.

Firstly, avoid splitting the big blob into multiple chunks of strings.

r264409 imposed an arbitrary limit to avoid a massive allocation on the
shared 'Record' SmallVector.  The bug with that commit only reproduced
when there were more than "chunk-size" strings.  A test for this would
have been useless long-term, since we're liable to adjust the chunk-size
in the future.

Thus, eliminate the motivation for chunk-ing by storing the string sizes
in the blob.  Here's the layout:

    vbr6: # of strings
    vbr6: offset-to-blob
    blob:
       [vbr6]: string lengths
       [char]: concatenated strings

Secondly, make the output of llvm-bcanalyzer readable.

I noticed when debugging r264409 that llvm-bcanalyzer was outputting a
massive blob all in one line.  Past a small number, the strings were
impossible to split in my head, and the lines were way too long.  This
version adds support in llvm-bcanalyzer for pretty-printing.

    <STRINGS abbrevid=4 op0=3 op1=9/> num-strings = 3 {
      'abc'
      'def'
      'ghi'
    }

From the original commit:

Inspired by Mehdi's similar patch, http://reviews.llvm.org/D18342, this
should (a) slightly reduce bitcode size, since there is less record
overhead, and (b) greatly improve reading speed, since blobs are super
cheap to deserialize.

llvm-svn: 264551

Split helper out of EmitRecordWithAbbrevImpl called emitBlob to reduce
code duplication, and add a few tests for it.

No functionality change intended.

llvm-svn: 264550

The implementation is fairly obvious.  This is preparation for using
some blobs in bitcode.

For clarity (and perhaps future-proofing?), I moved the call to
JumpToBit in BitstreamCursor::readRecord ahead of calling
MemoryObject::getPointer, since JumpToBit can theoretically (a) read
bytes, which (b) invalidates the blob pointer.

This isn't strictly necessary the two memory objects we have:

  - The return of RawMemoryObject::getPointer is valid until the memory
    object is destroyed.

  - StreamingMemoryObject::getPointer is valid until the next chunk is
    read from the stream.  Since the JumpToBit call is only going ahead
    to a word boundary, we'll never load another chunk.

However, reordering makes it clear by inspection that the blob returned
by BitstreamCursor::readRecord will be valid.

I added some tests for StreamingMemoryObject::getPointer and
BitstreamCursor::readRecord.

llvm-svn: 264549

Change the filename to indicate this is a test, rename the tests, move
them into an anonymous namespace, and rename some variables.  All to
match our usual style before making further changes.

llvm-svn: 264548

Allow users of SimpleBitstreamCursor to limit the number of bytes
available to the cursor.  This is preparation for instantiating a cursor
that isn't allowed to load more bytes from a StreamingMemoryObject (just
move around the ones already-loaded).

llvm-svn: 264547

Add API to SimpleBitstreamCursor to allow users to translate between
byte addresses and pointers.

  - jumpToPointer: move the bit position to a particular pointer.
  - getPointerToByte: get the pointer for a particular byte.
  - getPointerToBit: get the pointer for the byte of the current bit.
  - getCurrentByteNo: convenience function for assertions and tests.

Mainly adds unit tests (getPointerToBit/Byte already has a use), but
also preparation for eventually using jumpToPointer.

llvm-svn: 264546

Split out SimpleBitstreamCursor from BitstreamCursor, which is a
lower-level cursor with no knowledge of bitcode blocks, abbreviations,
or records.  It just knows how to read bits and navigate the stream.

This is mainly organizational, to separate the API for manipulating raw
bits from that for bitcode concepts like Record and Block.

llvm-svn: 264545

This reverts commit c45f2afac5d6855a4804456a0f718563dc47ada0.

Looks like it may be causing a failure, I'll revert for now.

                 from
lib/CodeGen/AsmPrinter/DwarfDebug.cpp:14:
/usr/include/c++/4.9.2/bits/stl_pair.h: In instantiation of
                 'std::pair<_T1, _T2>& std::pair<_T1,
                 _T2>::operator=(const std::pair<_T1, _T2>&) [with _T1 =
                 std::unique_ptr<llvm::DwarfTypeUnit>; _T2 = const
                 llvm::DICompositeType*]':

/usr/include/c++/4.9.2/bits/stl_pair.h:160:8: error: use of deleted
function 'std::unique_ptr<_Tp, _Dp>& std::unique_ptr<_Tp,
_Dp>::operator=(const std::unique_ptr<_Tp, _Dp>&) [with _Tp =
llvm::DwarfTypeUnit; _Dp = std::default_delete<llvm::DwarfTypeUnit>]'
  first = __p.first;
        ^

llvm-svn: 264544

(which SimplifyCFG can produce...)

llvm-svn: 264543

llvm-svn: 264542

I tried to use isPodLike in:
  http://reviews.llvm.org/D18483

That failed because !is_class is too strict on platforms which don't yet
have is_trivially_copyable. This update tries to make isPodLike smarter
for platforms which don't have is_trivially_copyable, and AFAICT it
Should Just Work on all of them. I'll revert if the bots disagree with
me.

I'll also rename isPodLike to isTriviallyCopyable if this all works out,
since that's what the standard calls it now and one day we'll be rid of
isPodLike.

llvm-svn: 264541

bit from the top bit to the bottom bit, so that we don't need 6 VBR6 hunks for
each macro location. Reduces libstdc++ module size by about 1%.

llvm-svn: 264540

llvm-svn: 264539

Try to appease
http://bb.pgr.jp/builders/cmake-llvm-x86_64-linux/builds/34772. This was
the only check that didn't use DAG and it wasn't found.

llvm-svn: 264538