a LoopInfoWrapperPass to wire the object up to the legacy pass manager.

This switches all the clients of LoopInfo over and paves the way to port
LoopInfo to the new pass manager. No functionality change is intended
with this iteration.

llvm-svn: 226373

The pass is really just a means of accessing a cached instance of the
TargetLibraryInfo object, and this way we can re-use that object for the
new pass manager as its result.

Lots of delta, but nothing interesting happening here. This is the
common pattern that is developing to allow analyses to live in both the
old and new pass manager -- a wrapper pass in the old pass manager
emulates the separation intrinsic to the new pass manager between the
result and pass for analyses.

llvm-svn: 226157

OtherOperandIdx is not used anymore, remove it to silence warnings.

llvm-svn: 226138

llvm-svn: 226126

While the term "Target" is in the name, it doesn't really have to do
with the LLVM Target library -- this isn't an abstraction which LLVM
targets generally need to implement or extend. It has much more to do
with modeling the various runtime libraries on different OSes and with
different runtime environments. The "target" in this sense is the more
general sense of a target of cross compilation.

This is in preparation for porting this analysis to the new pass
manager.

No functionality changed, and updates inbound for Clang and Polly.

llvm-svn: 226078

The bug was introduced in r225282. r225282 assumed that sub X, Y is
the same as add X, -Y. This is not correct if we are going to upgrade
the sub to sub nuw. This change fixes the issue by making the
optimization ignore sub instructions.

Differential Revision: http://reviews.llvm.org/D6979

llvm-svn: 226075

llvm-svn: 225929

llvm-svn: 225924

Part of PR21433.

llvm-svn: 225921

The new logic isn't actually reachable yet, so no functionality change.

llvm-svn: 225918

llvm-svn: 225917

llvm-svn: 225915

Still doesn't handle distinct ones.  Part of PR21433.

llvm-svn: 225914

llvm-svn: 225912

llvm-svn: 225911

llvm-svn: 225906

llvm-svn: 225905

Although this makes the `cast<>` assert more often, the
`assert(Node->isResolved())` on the following line would assert in all
those cases.  So, no functionality change here.

llvm-svn: 225903

llvm-svn: 225902

llvm-svn: 225901

llvm-svn: 225897

Working towards supporting `MDLocation` in `MapMetadata()`.

llvm-svn: 225896

It turns out, all callsites of the simplifier are guarded by a check for
CallInst::getCalledFunction (i.e., to make sure the callee is direct).

This check wasn't done when trying to further optimize a simplified fortified
libcall, introduced by a refactoring in r225640.

Fix that, add a testcase, and document the requirement.

llvm-svn: 225895

llvm-svn: 225762

The functions {pred,succ,use,user}_{begin,end} exist, but many users
have to check *_begin() with *_end() by hand to determine if the
BasicBlock or User is empty. Fix this with a standard *_empty(),
demonstrating a few usecases.

llvm-svn: 225760

Split `GenericMDNode` into two classes (with more descriptive names).

  - `UniquableMDNode` will be a common subclass for `MDNode`s that are
    sometimes uniqued like constants, and sometimes 'distinct'.

    This class gets the (short-lived) RAUW support and related API.

  - `MDTuple` is the basic tuple that has always been returned by
    `MDNode::get()`.  This is as opposed to more specific nodes to be
    added soon, which have additional fields, custom assembly syntax,
    and extra semantics.

    This class gets the hash-related logic, since other sublcasses of
    `UniquableMDNode` may need to hash based on other fields.

To keep this diff from getting too big, I've added casts to `MDTuple`
that won't really scale as new subclasses of `UniquableMDNode` are
added, but I'll clean those up incrementally.

(No functionality change intended.)

llvm-svn: 225682

This lets us remove CGP duplicate.

Differential Revision: http://reviews.llvm.org/D6541

llvm-svn: 225640

Put them in a separate function, so we can reuse them to further
simplify fortified libcalls as well.

Differential Revision: http://reviews.llvm.org/D6540

llvm-svn: 225639

The checks are the same for fortified counterparts to the libcalls, so
we might as well do them in a single place.

Differential Revision: http://reviews.llvm.org/D6539

llvm-svn: 225638

The previous code assumed that such instructions could not have any uses
outside CaseDest, with the motivation that the instruction could not
dominate CommonDest because CommonDest has phi nodes in it. That simply
isn't true; e.g., CommonDest could have an edge back to itself.

llvm-svn: 225552

Create new copies of distinct `MDNode`s instead of following the
uniquing `MDNode` logic.

Just like self-references (or other cycles), `MapMetadata()` creates a
new node.  In practice most calls use `RF_NoModuleLevelChanges`, in
which case nothing is duplicated anyway.

Part of PR22111.

llvm-svn: 225476

of operations that provably don't overflow. For example, we can prove
%civ.inc below does not sign-overflow. With this change,
IndVarSimplify changes %civ.inc to an add nsw.

  define i32 @foo(i32* %array, i32* %length_ptr, i32 %init) {
   entry:
    %length = load i32* %length_ptr, !range !0
    %len.sub.1 = sub i32 %length, 1
    %upper = icmp slt i32 %init, %len.sub.1
    br i1 %upper, label %loop, label %exit
  
   loop:
    %civ = phi i32 [ %init, %entry ], [ %civ.inc, %latch ]
    %civ.inc = add i32 %civ, 1
    %cmp = icmp slt i32 %civ.inc, %length
    br i1 %cmp, label %latch, label %break
  
   latch:
    store i32 0, i32* %array
    %check = icmp slt i32 %civ.inc, %len.sub.1
    br i1 %check, label %loop, label %break
  
   break:
    ret i32 %civ.inc
  
   exit:
    ret i32 42
  }

Differential Revision: http://reviews.llvm.org/D6748

llvm-svn: 225282

The swap implementation for iplist is currently unsupported.  Simply splice the
old list into place, which achieves the same purpose.  This is needed in order
to thread the -frewrite-map-file frontend option correctly.  NFC.

llvm-svn: 225186

Wrap a couple of lines.  NFC.

llvm-svn: 225185

a cache of assumptions for a single function, and an immutable pass that
manages those caches.

The motivation for this change is two fold. Immutable analyses are
really hacks around the current pass manager design and don't exist in
the new design. This is usually OK, but it requires that the core logic
of an immutable pass be reasonably partitioned off from the pass logic.
This change does precisely that. As a consequence it also paves the way
for the *many* utility functions that deal in the assumptions to live in
both pass manager worlds by creating an separate non-pass object with
its own independent API that they all rely on. Now, the only bits of the
system that deal with the actual pass mechanics are those that actually
need to deal with the pass mechanics.

Once this separation is made, several simplifications become pretty
obvious in the assumption cache itself. Rather than using a set and
callback value handles, it can just be a vector of weak value handles.
The callers can easily skip the handles that are null, and eventually we
can wrap all of this up behind a filter iterator.

For now, this adds boiler plate to the various passes, but this kind of
boiler plate will end up making it possible to port these passes to the
new pass manager, and so it will end up factored away pretty reasonably.

llvm-svn: 225131

- Fix the case where more than 1 common instructions derived from the same
  operand cannot be sunk. When a pair of value has more than 1 derived values
  in both branches, only 1 derived value could be sunk.
- Replace BB1 -> (BB2, PN) map with joint value map, i.e.
  map of (BB1, BB2) -> PN, which is more accurate to track common ops.

llvm-svn: 224757

A cast that was introduced in r209007 was accidentally left in after the changes made to GlobalAlias rules in r210062. This crashes if the aliasee is a now-leggal ConstantExpr.

llvm-svn: 224756

Take two disjoint Loops L1 and L2.

LoopSimplify fails to simplify some loops (e.g. when indirect branches
are involved). In such situations, it can happen that an exit for L1 is
the header of L2. Thus, when we create PHIs in one of such exits we are
also inserting PHIs in L2 header.

This could break LCSSA form for L2 because these inserted PHIs can also
have uses in L2 exits, which are never handled in the current
implementation. Provide a fix for this corner case and test that we
don't assert/crash on that.

Differential Revision: http://reviews.llvm.org/D6624

rdar://problem/19166231

llvm-svn: 224740

Instead of reusing the name `MapValue()` when mapping `Metadata`, use
`MapMetadata()`.  The old name doesn't make much sense after the
`Metadata`/`Value` split.

llvm-svn: 224566

Patch by Amjad Aboud

Differential Revision: http://reviews.llvm.org/D6525

llvm-svn: 224015