llvm-svn: 342148

llvm-svn: 342118

Summary:
The snippet-generation part goes to the SnippetGenerator class.

This will allow benchmarking arbitrary code (see PR38437).

Reviewers: gchatelet

Subscribers: mgorny, tschuett, llvm-commits

Differential Revision: https://reviews.llvm.org/D51979

llvm-svn: 342117

Teach llvm-cov to use the new llvm JSON library, and remove some
redundant/brittle JSON serialization tests.

llvm-svn: 342088

r342003 added support for emitting FPO data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the PDB
file.  However, that is not the end of the story.  FPO can end
up in two different destinations in a PDB, each corresponding to
a different FPO data source.

The case handled by r342003 involves copying data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the
"New FPO" stream in the PDB, which is then referred to by the
DBI stream.  The case handled by this patch involves copying
records from the .debug$F section of an object file to the "FPO"
stream (or perhaps more aptly, the "Old FPO" stream) in the PDB
file, which is also referred to by the DBI stream.

The formats are largely similar, and the difference is mostly
only visible in masm generated object files, such as some of the
low-level CRT object files like memcpy.  MASM doesn't appear to
support writing the DEBUG_S_FRAMEDATA subsection, and instead
just writes these records to the .debug$F section.

Although clang-cl does not emit a .debug$F section ever, lld still
needs to support it so we have good debugging for CRT functions.

Differential Revision: https://reviews.llvm.org/D51958

llvm-svn: 342080

Submitted on behalf of Armando Montanez (amontanez@google.com).

Objects with unused program headers copied by objcopy would always have
nonzero values for program header offset and program header entry size.
While technically valid, this atypical behavior triggers warnings in some
tools. This change sets the two fields to zero when the program header is
unused, better fitting the general expectations for unused program header
data.

Section headers behaved somewhat similarly (though only with the entry size),
and are fixed in this revision as well.

Differential Revision: https://reviews.llvm.org/D51961

llvm-svn: 342065

llvm-svn: 342056

Eliminating some duplication of rangelist dumping code at the expense of
some version-dependent code in dump and extract routines.

Reviewer: dblaikie, JDevlieghere, vleschuk

Differential revision: https://reviews.llvm.org/D51081

llvm-svn: 342048

llvm-svn: 342035

llvm-svn: 342003

llvm-svn: 342000

Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:

  0: no register - Used when there are no variables.
  1: SP / standard - Variables are stored relative to the standard SP
     for the ISA.
  2: FP - Variables are addressed relative to the ISA frame
     pointer, i.e. EBP on x86. If realignment is required, parameters
     use this. If a dynamic alloca is used, locals will be EBP relative.
  3: Alternative - Variables are stored relative to some alternative
     third callee-saved register. This is required to address highly
     aligned locals when there are dynamic stack adjustments. In this
     case, both the incoming SP saved in the standard FP and the current
     SP are at some dynamic offset from the locals. LLVM uses ESI in
     this case, MSVC uses EBX.

Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.

Subscribers: hiraditya

Differential Revision: https://reviews.llvm.org/D51894

llvm-svn: 341999

Summary:
This patch removes the storing of accumulated floating point data 
within the llvm-mca library.

This patch splits-up the two quantities: cycles and number of resource units.
By splitting-up these two quantities, we delay the calculation of "cycles per resource unit"
until that value is read, reducing the chance of accumulating floating point error. 

I considered using the APFloat, but after measuring performance, for a large (many iteration)
sample, I decided to go with this faster solution.

Reviewers: andreadb, courbet, RKSimon

Reviewed By: andreadb

Subscribers: llvm-commits, javed.absar, tschuett, gbedwell

Differential Revision: https://reviews.llvm.org/D51903

llvm-svn: 341980

Summary:
In this change, we implement a `BlockPrinter` which orders records in a
Block that's been indexed by the `BlockIndexer`. This is used in the
`llvm-xray fdr-dump` tool which ties together the various types and
utilities we've been working on, to allow for inspection of XRay FDR
mode traces both with and without verification.

This change is the final step of the refactoring of D50441.

Reviewers: mboerger, eizan

Subscribers: mgorny, hiraditya, llvm-commits

Differential Revision: https://reviews.llvm.org/D51846

llvm-svn: 341887

The Create method can just construct the ExecutionSession, rather than having the
client pass it in.

llvm-svn: 341872

Some asm has double spaces between operands, the deserializer was keeping these empty split pieces, causing assertions later on:

'ADC16mi RDI i_0x1x  i_0x0x  i_0x1x'

llvm-svn: 341799

In order to start testing this, I've added a new mode to
llvm-pdbutil which is only really useful for writing tests.
It just dumps the value of raw fields in record format.
This isn't really ideal and it won't allow us to test some
important cases, but it's better than nothing for now.

llvm-svn: 341729

The improved dumping helps me investigate PR38857.

llvm-svn: 341695

Before this patch, analyzeContext called getCanonicalDIEOffset(), for
which the result depends on the timings of the setCanonicalDIEOffset()
calls in the cloneLambda. This can lead to slightly different output
between runs due to threading.

To prevent this from happening, we now record the output debug info size
after importing the modules (before any concurrent processing takes
place). This value, named the ModulesEndOffset is used to compare the
canonical DIE offset against. If the value is greater than this offset,
the canonical DIE offset has been updated during cloning, and should
therefore not be considered for pruning.

Differential revision: https://reviews.llvm.org/D51443

llvm-svn: 341649

  Third Attempt:
    - Alignment issues resolved.
    - zlib::isAvailable() detected.
    - ArrayRef misuse fixed.

  Usage:

  llvm-objcopy --compress-debug-sections=zlib foo.o
  llvm-objcopy --compress-debug-sections=zlib-gnu foo.o

  In both cases the debug section contents is compressed with zlib. In the GNU
  style case the header is the "ZLIB" magic string followed by the uint64 big-
  endian decompressed size. In the non-GNU mode the header is the
  Elf(32|64)_Chdr.

  Decompression support is coming soon.

  Differential Revision: https://reviews.llvm.org/D49678

llvm-svn: 341635

Various bots still fail for unknown reason.

llvm-svn: 341613

  Second Attempt. Alignment issues resolved. zlib::isAvailable() detected.

  Usage:

  llvm-objcopy --compress-debug-sections=zlib foo.o
  llvm-objcopy --compress-debug-sections=zlib-gnu foo.o

  In both cases the debug section contents is compressed with zlib. In the GNU
  style case the header is the "ZLIB" magic string followed by the uint64 big-
  endian decompressed size. In the non-GNU mode the header is the
  Elf(32|64)_Chdr.

  Decompression support is coming soon.

  Differential Revision: https://reviews.llvm.org/D49678

llvm-svn: 341607

It caused ambiguity between llvm::cl::Optional and llvm::Optional, which
has been fixed by dropping `using namespace cl;` in favor of explicit
cl:: qualified names.

llvm-svn: 341586

`using namespace cl` makes llvm::cl::Optional (in Support/CommandLine.h) visible which will cause ambiguity when unqualified `Optional` is looked up (can also refer to llvm::Optional).

cl:: is used much more than `using namespace cl`, so let's not use the latter.

Also append \n to the argument of cl::ParseCommandLineOptions

llvm-svn: 341584

This was from a missed review comment from D51338.

llvm-svn: 341577

MRI scripts have two comment chars, * and ;, but only the latter was
supported before.

Also allow leading spaces before comment chars (and before any command
string), and allow comments after a command.

Differential Revision: https://reviews.llvm.org/D51338

llvm-svn: 341571

Keeping the compile units in memory is expensive. For the single
threaded case we allocate them in the analyze part and deallocate them
again once we've finished cloning. This poses a problem in the single
threaded case where we did all the analysis first followed by all the
cloning. This meant we had all the link context in memory right after
analyzing finished.

This patch changes the way we order work in the single threaded case.
Instead of doing all the analysis and cloning in serial, we now
interleave the two so we can deallocate the memory as soon as a file is
processed. The result is binary identical and peak memory usage went
down from 13.43GB to 5.73GB for a debug build of trunk clang.

Differential revision: https://reviews.llvm.org/D51618

llvm-svn: 341568

llvm-svn: 341515

Reviewers: dblaikie, pcc

Subscribers: llvm-commits

Differential Revision: https://reviews.llvm.org/D51707

llvm-svn: 341509

The way DIA SDK works is that when you request a symbol, it
gets assigned an internal identifier that is unique for the
life of the session.  You can then use this identifier to
get back the same symbol, with all of the same internal state
that it had before, even if you "destroyed" the original
copy of the object you had.

This didn't work properly in our native implementation, and
if you destroyed an object for a particular symbol, then
requested the same symbol again, it would get assigned a new
ID and you'd get a fresh copy of the object.  In order to fix
this some refactoring had to happen to properly reuse cached
objects.  Some unittests are added to verify that symbol
reuse is taking place, making use of the new unittest input
feature.

llvm-svn: 341503

Part of https://reviews.llvm.org/D51652 (tests will be in the lld repo)

llvm-svn: 341485

Summary:
Allow strip to be called on multiple input files, which is interpreted as stripping N files in place. Using multiple input files is incompatible with -o.

To allow this, create a `DriverConfig` struct which just wraps a list of `CopyConfigs`. objcopy will only ever have a single `CopyConfig`, but strip will have N (where N >= 1) CopyConfigs.

Reviewers: alexshap, jakehehrlich

Reviewed By: alexshap, jakehehrlich

Subscribers: MaskRay, jakehehrlich, llvm-commits

Differential Revision: https://reviews.llvm.org/D51660

llvm-svn: 341464

Summary: This patch runs clang-format on all wasm-only files.

Reviewers: aardappel, dschuff, sunfish, tlively

Subscribers: MatzeB, sbc100, jgravelle-google, llvm-commits

Differential Revision: https://reviews.llvm.org/D51447

llvm-svn: 341439

Summary:
Fixes the error "Link field value 0 in section .rela.plt is invalid" when copying/stripping certain binaries. Minimal repro:

```
$ cat /tmp/a.c
int main() { return 0; }
$ clang -static /tmp/a.c -o /tmp/a
$ llvm-strip /tmp/a -o /tmp/b
llvm-strip: error: Link field value 0 in section .rela.plt is invalid.
```

Reviewers: jakehehrlich, alexshap

Subscribers: llvm-commits

Differential Revision: https://reviews.llvm.org/D51493

llvm-svn: 341419

Also reverts follow-up commits r341343 and r341344.

The primary commit continues to break some build bots even after the
fixes in r341343 for UBSan issues:
http://lab.llvm.org:8011/builders/clang-cmake-aarch64-full/builds/5823

It is also failing for me locally (linux, x86-64).

llvm-svn: 341360

llvm-svn: 341344

llvm-svn: 341343

  Usage:

  llvm-objcopy --compress-debug-sections=zlib foo.o
  llvm-objcopy --compress-debug-sections=zlib-gnu foo.o

  In both cases the debug section contents is compressed with zlib. In the GNU
  style case the header is the "ZLIB" magic string followed by the uint64 big-
  endian decompressed size. In the non-GNU mode the header is the
  Elf(32|64)_Chdr.

  Decompression support is coming soon.


  Differential Revision: https://reviews.llvm.org/D49678

llvm-svn: 341342

Also adjust some of dsymutil's headers to put the header guards at the top,
otherwise the compiler will not recognize them as header guards.

llvm-svn: 341323

llvm-svn: 341281