When WriteFragmentData() case FT_align called
Asm.getBackend().writeNopData() is called, nothing
is done since Mips implementation of writeNopData just
returned "true".

For some reason this has not caused problems in 32 bit
mode, but in 64 bit mode it caused an assert when processing
multiple function units.

The test case included will assert without this patch. It
runs twice with different flags to prevent false positives
due to changes in code generation over time.

llvm-svn: 160084

llvm-svn: 160082

Even though variable in question could not 
be initialized before use, the code was such that 
the compiler had no way of knowing that.

llvm-svn: 160081

llvm-svn: 160076

file buffer is null-terminated.

If the file is smaller than we thought, mmap will not allow dereferencing
past the pages that are enough to cover the actual file size,
even though we asked for a larger address range.

rdar://11612916

llvm-svn: 160075

order of binary encoding.

Patch by Vladimir Medic.

llvm-svn: 160073

comments.

llvm-svn: 160069

llvm-svn: 160067

When Movr0 is between sub and cmp, we move Movr0 before sub if it enables
removal of Cmp.

llvm-svn: 160066

llvm-svn: 160064

r1025 = s/zext r1024, 4
r1026 = extract_subreg r1025, 4

to a copy:
r1026 = copy r1024

This is correct. However it uses TII->isCoalescableExtInstr() which can return
true for instructions which essentially does a sext_in_reg so this can end up
with an illegal copy where the source and destination register classes do not
match. Add a check to avoid it. Sorry, no test case possible at this time.

rdar://11849816

llvm-svn: 160059

This caused 6 of 65k possible 8 bit udivs to be wrong.

llvm-svn: 160058

llvm-svn: 160056

to Selection DAG isel.  Patch by Andrew Kaylor <andrew.kaylor@intel.com>.

llvm-svn: 160055

When ext-loading and trunc-storing vectors to memory, on x86 32bit systems, allow loads/stores of 64bit values from xmm registers.

llvm-svn: 160044

No functionality change.

llvm-svn: 160042

llvm-svn: 160040

Load and Store nodes into their own functions.
No functional change.

llvm-svn: 160037

Only apply the SETCC+SITOFP -> SELECTCC optimization when the SETCC returns an MVT::i1, i.e. before type legalization.
This is a speculative fix for a problem on Mips reported by Akira Hatanaka.

llvm-svn: 160036

Patch by Sasa Stankovic.

llvm-svn: 160031

   
   Low order register of a double word register operand. Operands 
   are defined by the name of the variable they are marked with in
   the inline assembler code. This is a way to specify that the 
   operand just refers to the low order register for that variable.
   
   It is the opposite of modifier 'D' which specifies the high order
   register.
   
   Example:
   
 main()
{

    long long ll_input = 0x1111222233334444LL;
    long long ll_val = 3;
    int i_result = 0;

    __asm__ __volatile__( 
		   "or	%0, %L1, %2"
	     : "=r" (i_result) 
	     : "r" (ll_input), "r" (ll_val)); 
}

   Which results in:
   
   	lui	$2, %hi(_gp_disp)
	addiu	$2, $2, %lo(_gp_disp)
	addiu	$sp, $sp, -8
	addu	$2, $2, $25
	sw	$2, 0($sp)
	lui	$2, 13107
	ori	$3, $2, 17476     <-- Low 32 bits of ll_input
	lui	$2, 4369
	ori	$4, $2, 8738      <-- High 32 bits of ll_input
	addiu	$5, $zero, 3  <-- Low 32 bits of ll_val
	addiu	$2, $zero, 0  <-- High 32 bits of ll_val
	#APP
	or	$3, $4, $5        <-- or i_result, high 32 ll_input, low 32 of ll_val
	#NO_APP
	addiu	$sp, $sp, 8
	jr	$ra

If not direction is done for the long long for 32 bit variables results
in using the low 32 bits as ll_val shows.

There is an existing bug if 'L' or 'D' is used for the destination register
for 32 bit long longs in that the target value will be updated incorrectly
for the non-specified part unless explicitly set within the inline asm code.

llvm-svn: 160028

It will surely be needed by heuristics.

llvm-svn: 160027

generalizing its implementation sufficiently to support this value
number scenario as well.

This cuts out another significant performance hit in large functions
(over 10k basic blocks, etc), especially those with "natural" CFG
structures.

llvm-svn: 160026

This ordering allows nested if-conversion without using a work list, and
it makes it possible to update the dominator tree on the fly as well.

Any erased basic blocks will always be dominated by the current
post-order position, so the domtree can be pruned without invalidating
the iterator.

llvm-svn: 160025

X86MachineFunctionInfo as this is currently only used by X86. If this ever
becomes an issue on another arch (e.g., ARM) then we can hoist it back out.

llvm-svn: 160009

llvm-svn: 160006

llvm-svn: 160004

X86.  Basically, this is a reapplication of r158087 with a few fixes.

Specifically, (1) the stack pointer is restored from the base pointer before
popping callee-saved registers and (2) in obscure cases (see comments in patch)
we must cache the value of the original stack adjustment in the prologue and
apply it in the epilogue.

rdar://11496434

llvm-svn: 160002

back of it.

I don't have anything even remotely close to a test case for this. It
only broke two build bots, both of them doing bootstrap builds, one of
them a dragonegg bootstrap. It doesn't break for me when I bootstrap
either. It doesn't reproduce every time or on many machines during the
bootstrap. Many thanks to Duncan Sands who got the exact command (and
stage of the bootstrap) which failed on the dragonegg bootstrap and
managed to get it to trigger under valgrind with debug symbols. The fix
was then found by inspection.

llvm-svn: 159993

Improve the loading of load-anyext vectors by allowing the codegen to load
multiple scalars and insert them into a vector. Next, we shuffle the elements
into the correct places, as before.
Also fix a small dagcombine bug in SimplifyBinOpWithSameOpcodeHands, when the
migration of bitcasts happened too late in the SelectionDAG process.

llvm-svn: 159991

Fix instruction description of VMOV (between two ARM core registers and two single-precision resiters) (and do it properly this time!

llvm-svn: 159989

llvm-svn: 159983

quadratic behavior when performing pathological merges. Fixes the core
element of PR12652.

There is only one user of addRangeFrom left: join. I'm hoping to
refactor further in a future patch and have join use this merge
operation as well.

llvm-svn: 159982

of the trick merge routines. This adds a layer of testing that was
necessary when implementing more efficient (and complex) merge logic for
this datastructure.

No functionality changed here.

llvm-svn: 159981

Some NEON instructions want to match against normal SDNodes for some
operand types and Intrinsics for others. For example, CTLZ. To enable this,
switch from explicitly requiring Intrinsic on the class templates to using
SDPatternOperator instead.

llvm-svn: 159974

TableGen has support for using an intrinics name directly in a DAG,
but this breaks down when referring to just a node, as that's
handled initializer list stuff entirely via subclassing in the
parser. That is, using an instrinsic like "(int_my_intrinsic ...)"
works fine. Using it standalone for parameterizing the operator
in such a DAG does not.

Fixing this is simple enough, as we simply declare Intrinsic
as deriving from SDPatternOperator, which is the class name
intended for exactly this purpose in TargetSelectionDAG.td.

When the intrinsic is actually used in the DAG pattern, it will
be recognized and expanded to an intrinsic_wo_chain (et. al.)
just like when it's used directly.

Incoming ARM NEON cleanup based on this and a bit of functionality
improvement after that.

llvm-svn: 159973

llvm-svn: 159971

obscure ways, and it isn't actually important in the real world.

llvm-svn: 159969

llvm-svn: 159960

llvm-svn: 159959