- Expand tabs... (poss 80-col violations, will get them later...)
- Consolidate logic for SelectDFormAddr and SelectDForm2Addr into a single
  function, simplifying maintenance. Also reduced custom instruction
  generation for SPUvecinsert/INSERT_MASK.

llvm-svn: 46544

and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.

llvm-svn: 46538

Work in progress. This patch *fixes* x86-64 calls which are modelled as StructRet but really should be return in registers, e.g. _Complex long double, some 128-bit aggregates. This is a short term solution that is necessary only because llvm, for now, cannot model i128 nor call's with multiple results.
Status: This only works for direct calls, and only the caller side is done. Disabled for now.

llvm-svn: 46527

to get the alignment of global variables, rather than
using hand-made versions.

llvm-svn: 46495

llvm-svn: 46485

only two addressing mode nodes, SPUaform and SPUindirect (vice the
three previous ones, SPUaform, SPUdform and SPUxform). This improves
code somewhat because we now avoid using reg+reg addressing when
it can be avoided. It also simplifies the address selection logic,
which was the main point for doing this.

Also, for various global variables that would be loaded using SPU's
A-form addressing, prefer D-form offs[reg] addressing, keeping the
base in a register if the variable is used more than once.

llvm-svn: 46483

the function label isn't associated with something it shouldn't be.

llvm-svn: 46449

llvm-svn: 46413

llvm-svn: 46411

llvm-svn: 46405

now that the dag combiner does it.

llvm-svn: 46404

nop. Emit the nop directly for PPC.

llvm-svn: 46398

a "nop" instruction so that we don't have the function's label associated
with something that it's not supposed to be associated with.

llvm-svn: 46394

was actually passing a completely incorrect size to sys_icache_invalidate.
Instead of having the JITEmitter do this (which doesn't have the correct 
size), just make the target sync its own stubs.

llvm-svn: 46354

llvm-svn: 46345

us to compile:

double test(double X) {
  return copysign(0.0, X);
}

into:

_test:
	andpd	LCPI1_0(%rip), %xmm0
	ret

instead of:
_test:
	pxor	%xmm1, %xmm1
	andpd	LCPI1_0(%rip), %xmm1
	movapd	%xmm0, %xmm2
	andpd	LCPI1_1(%rip), %xmm2
	movapd	%xmm1, %xmm0
	orpd	%xmm2, %xmm0
	ret

llvm-svn: 46344

This should fix bunch of issues.

llvm-svn: 46337

This case returns the value in ST(0) and then has to convert it to an SSE
register.  This causes significant codegen ugliness in some cases.  For 
example in the trivial fp-stack-direct-ret.ll testcase we used to generate:

_bar:
	subl	$28, %esp
	call	L_foo$stub
	fstpl	16(%esp)
	movsd	16(%esp), %xmm0
	movsd	%xmm0, 8(%esp)
	fldl	8(%esp)
	addl	$28, %esp
	ret

because we move the result of foo() into an XMM register, then have to
move it back for the return of bar.

Instead of hacking ever-more special cases into the call result lowering code
we take a much simpler approach: on x86-32, fp return is modeled as always 
returning into an f80 register which is then truncated to f32 or f64 as needed.
Similarly for a result, we model it as an extension to f80 + return.

This exposes the truncate and extensions to the dag combiner, allowing target
independent code to hack on them, eliminating them in this case.  This gives 
us this code for the example above:

_bar:
	subl	$12, %esp
	call	L_foo$stub
	addl	$12, %esp
	ret

The nasty aspect of this is that these conversions are not legal, but we want
the second pass of dag combiner (post-legalize) to be able to hack on them.
To handle this, we lie to legalize and say they are legal, then custom expand
them on entry to the isel pass (PreprocessForFPConvert).  This is gross, but
less gross than the code it is replacing :)

This also allows us to generate better code in several other cases.  For 
example on fp-stack-ret-conv.ll, we now generate:

_test:
	subl	$12, %esp
	call	L_foo$stub
	fstps	8(%esp)
	movl	16(%esp), %eax
	cvtss2sd	8(%esp), %xmm0
	movsd	%xmm0, (%eax)
	addl	$12, %esp
	ret

where before we produced (incidentally, the old bad code is identical to what
gcc produces):

_test:
	subl	$12, %esp
	call	L_foo$stub
	fstpl	(%esp)
	cvtsd2ss	(%esp), %xmm0
	cvtss2sd	%xmm0, %xmm0
	movl	16(%esp), %eax
	movsd	%xmm0, (%eax)
	addl	$12, %esp
	ret

Note that we generate slightly worse code on pr1505b.ll due to a scheduling 
deficiency that is unrelated to this patch.

llvm-svn: 46307

Let each target decide byval alignment. For X86, it's 4-byte unless the aggregare contains SSE vector(s). For x86-64, it's max of 8 or alignment of the type.

llvm-svn: 46286

precision integers.  This won't actually work
(and most of the code is dead) unless the new
legalization machinery is turned on.  While
there, I rationalized the handling of i1, and
removed some bogus (and unused) sextload patterns.
For i1, this could result in microscopically
better code for some architectures (not X86).
It might also result in worse code if annotating
with AssertZExt nodes turns out to be more harmful
than helpful.

llvm-svn: 46280

llvm-svn: 46267

llvm-svn: 46262

llvm-svn: 46243

llvm-svn: 46200

llvm-svn: 46199

llvm-svn: 46198

parameters, since otherwise it won't be passed in
the right register.  With this change trampolines
work on x86-64 (thanks to Luke Guest for providing
access to an x86-64 box).

llvm-svn: 46192

llvm-svn: 46174

llvm-svn: 46165

_test:
	fctiwz f0, f1
	stfiwx f0, 0, r4
	blr 

instead of:

_test:
	fctiwz f0, f1
	stfd f0, -8(r1)
	nop
	nop
	lwz r2, -4(r1)
	stb r2, 0(r4)
	blr 

The former is not correct (stores 4 bytes, not 1).

llvm-svn: 46161

llvm-svn: 46159

as weak globals rather than commons.  While not wrong,
this change tickled a latent bug in Darwin's strip,
so revert it for now as a workaround.

llvm-svn: 46147

as weak globals rather than commons.  While not wrong,
this change tickled a latent bug in Darwin's strip,
so revert it for now as a workaround.

llvm-svn: 46144

Fixed CellSPU's A-form (local store) address mode, so that all globals,
externals, constant pool and jump table symbols are now wrapped within
a SPUISD::AFormAddr pseudo-instruction. This now identifies all local
store memory addresses, although it requires a bit of legerdemain during
instruction selection to properly select loads to and stores from local
store, properly generating "LQA" instructions.

Also added mul_ops.ll test harness for exercising integer multiplication.

llvm-svn: 46142

1. Legalize now always promotes truncstore of i1 to i8. 
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
   X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
   safe.

The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:

_foo:
	fldt	20(%esp)
	fldt	4(%esp)
	faddp	%st(1)
	movl	36(%esp), %eax
	fstps	(%eax)
	ret

instead of:

_foo:
	subl	$4, %esp
	fldt	24(%esp)
	fldt	8(%esp)
	faddp	%st(1)
	fstps	(%esp)
	movl	40(%esp), %eax
	movss	(%esp), %xmm0
	movss	%xmm0, (%eax)
	addl	$4, %esp
	ret

llvm-svn: 46140

  and switch various codegen pieces and the X86 backend over
  to using it.

* Add some comments to SelectionDAGNodes.h

* Introduce a second argument to FP_ROUND, which indicates
  whether the FP_ROUND changes the value of its input. If
  not it is safe to xform things like fp_extend(fp_round(x)) -> x.

llvm-svn: 46125

it should work, but I have no machine to test
it on.  Committed because it will at least
cause no harm, and maybe someone can test it
for me!

llvm-svn: 46098

llvm-svn: 46058

some code.  No functionality change.

llvm-svn: 46055

make the 'fp return in ST(0)' optimization smart enough to
look through token factor nodes.  THis allows us to compile 
testcases like CodeGen/X86/fp-stack-retcopy.ll into:

_carg:
	subl	$12, %esp
	call	L_foo$stub
	fstpl	(%esp)
	fldl	(%esp)
	addl	$12, %esp
	ret

instead of:

_carg:
	subl	$28, %esp
	call	L_foo$stub
	fstpl	16(%esp)
	movsd	16(%esp), %xmm0
	movsd	%xmm0, 8(%esp)
	fldl	8(%esp)
	addl	$28, %esp
	ret

Still not optimal, but much better and this is a trivial patch.  Fixing 
the rest requires invasive surgery that is is not llvm 2.2 material.

llvm-svn: 46054