loads in order to reduce register pressure.

llvm-svn: 82470

All of these do not have patterns (they're for the
disassembler).

Many of the floating-point instructions will probably
be rolled into definitions that have patterns, and may
eventually be superseded by mdefs.  So I put them
together and left a comment.

llvm-svn: 81979

Intel documentation.

llvm-svn: 79554

Add patterns and instruction encoding information.
Add custom lowering to deal with hardwired return register of
uncertain type (xmm0).

llvm-svn: 79377

 - Used to mark fake instructions which don't correspond to an actual machine
   instruction (or are duplicates of a real instruction). This is to be used for
   "special cases" in the .td files, which should be ignored by things like the
   assembler and disassembler. We still need a good solution to handle pervasive
   duplication, like with the Int_ instructions.

 - Set the bit on fake "mov 0" style instructions, which allows turning an
   assembler matcher warning into a hard error.

 - -2 FIXMEs.

llvm-svn: 78731

llvm-svn: 78600

structure.

llvm-svn: 78581

classes for X86.

llvm-svn: 78524

bytes for F2 0F 38 and propagate. Add a FIXME for a set
of possibilities which correspond to intrinsics already used.

New test.

llvm-svn: 78508

llvm-svn: 77718

due to x86 encoding restrictions. This is currently off by default
because it may cause code quality regressions. This is for PR4572.

llvm-svn: 77565

to ptest instruction plus setcc. Revamp ptest instruction. Add test.

llvm-svn: 77407

to support vector arguments and scalar arguments correctly. Update
lowering and fix comment to refer to pinsr* instead of insertps.

llvm-svn: 76921

testcases to make sure it's being generated.

llvm-svn: 76843

handle with an SSE2 instruction.

llvm-svn: 73760

llvm-svn: 72987

decoding. Essentially, they both map to the same column in the "opcode
extensions for one- and two-byte opcodes" table in the x86 manual. The RawFrm
complicates decoding this.

Instead, use opcode 0x01, prefix 0x01, and form MRM1r. Then have the code
emitter special case these, a la [SML]FENCE.

llvm-svn: 72556

llvm-svn: 72535

llvm-svn: 72534

the Intel manual (screenshot) says it should be 0b11110110 (f6).  The existing
encoding causes a disassembly conflict with MMX_PAVGBrm, which really should be
0f e0."

Patch by Sean Callanan!

llvm-svn: 72508

llvm-svn: 72488

llvm-svn: 71582

llvm-svn: 70425

PR2957

ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask.  A value of -1 represents UNDEF.

In addition to eliminating the creation of illegal BUILD_VECTORS just to 
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.

llvm-svn: 70225

llvm-svn: 69967

ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask.  A value of -1 represents UNDEF.

In addition to eliminating the creation of illegal BUILD_VECTORS just to 
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.

A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.

llvm-svn: 69952

Tested by bootstrapping llvm-gcc and using that to build llvm.

llvm-svn: 68645

builds.

--- Reverse-merging (from foreign repository) r68552 into '.':
U    test/CodeGen/X86/tls8.ll
U    test/CodeGen/X86/tls10.ll
U    test/CodeGen/X86/tls2.ll
U    test/CodeGen/X86/tls6.ll
U    lib/Target/X86/X86Instr64bit.td
U    lib/Target/X86/X86InstrSSE.td
U    lib/Target/X86/X86InstrInfo.td
U    lib/Target/X86/X86RegisterInfo.cpp
U    lib/Target/X86/X86ISelLowering.cpp
U    lib/Target/X86/X86CodeEmitter.cpp
U    lib/Target/X86/X86FastISel.cpp
U    lib/Target/X86/X86InstrInfo.h
U    lib/Target/X86/X86ISelDAGToDAG.cpp
U    lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U    lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.cpp
U    lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U    lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U    lib/Target/X86/X86ISelLowering.h
U    lib/Target/X86/X86InstrInfo.cpp
U    lib/Target/X86/X86InstrBuilder.h
U    lib/Target/X86/X86RegisterInfo.td

llvm-svn: 68560

This introduces a small regression on the generated code
quality in the case we are just computing addresses, not
loading values.

Will work on it and on X86-64 support.

llvm-svn: 68552

ADDS{D|S}rr_Int and MULS{D|S}rr_Int are not commutable. The users of these intrinsics expect the high bits will not be modified.

llvm-svn: 65499

Generate better code for v16i8 shuffles on SSE2 (avoids stack)
Generate pshufb for v8i16 and v16i8 shuffles on SSSE3 where it is fewer uops.
Document the shuffle matching logic and add some FIXMEs for later further
  cleanups.
New tests that test the above.

Examples:

New:
_shuf2:
	pextrw	$7, %xmm0, %eax
	punpcklqdq	%xmm1, %xmm0
	pshuflw	$128, %xmm0, %xmm0
	pinsrw	$2, %eax, %xmm0

Old:
_shuf2:
	pextrw	$2, %xmm0, %eax
	pextrw	$7, %xmm0, %ecx
	pinsrw	$2, %ecx, %xmm0
	pinsrw	$3, %eax, %xmm0
	movd	%xmm1, %eax
	pinsrw	$4, %eax, %xmm0
	ret

=========

New:
_shuf4:
	punpcklqdq	%xmm1, %xmm0
	pshufb	LCPI1_0, %xmm0

Old:
_shuf4:
	pextrw	$3, %xmm0, %eax
	movsd	%xmm1, %xmm0
	pextrw	$3, %xmm1, %ecx
	pinsrw	$4, %ecx, %xmm0
	pinsrw	$5, %eax, %xmm0

========

New:
_shuf1:
	pushl	%ebx
	pushl	%edi
	pushl	%esi
	pextrw	$1, %xmm0, %eax
	rolw	$8, %ax
	movd	%xmm0, %ecx
	rolw	$8, %cx
	pextrw	$5, %xmm0, %edx
	pextrw	$4, %xmm0, %esi
	pextrw	$3, %xmm0, %edi
	pextrw	$2, %xmm0, %ebx
	movaps	%xmm0, %xmm1
	pinsrw	$0, %ecx, %xmm1
	pinsrw	$1, %eax, %xmm1
	rolw	$8, %bx
	pinsrw	$2, %ebx, %xmm1
	rolw	$8, %di
	pinsrw	$3, %edi, %xmm1
	rolw	$8, %si
	pinsrw	$4, %esi, %xmm1
	rolw	$8, %dx
	pinsrw	$5, %edx, %xmm1
	pextrw	$7, %xmm0, %eax
	rolw	$8, %ax
	movaps	%xmm1, %xmm0
	pinsrw	$7, %eax, %xmm0
	popl	%esi
	popl	%edi
	popl	%ebx
	ret

Old:
_shuf1:
	subl	$252, %esp
	movaps	%xmm0, (%esp)
	movaps	%xmm0, 16(%esp)
	movaps	%xmm0, 32(%esp)
	movaps	%xmm0, 48(%esp)
	movaps	%xmm0, 64(%esp)
	movaps	%xmm0, 80(%esp)
	movaps	%xmm0, 96(%esp)
	movaps	%xmm0, 224(%esp)
	movaps	%xmm0, 208(%esp)
	movaps	%xmm0, 192(%esp)
	movaps	%xmm0, 176(%esp)
	movaps	%xmm0, 160(%esp)
	movaps	%xmm0, 144(%esp)
	movaps	%xmm0, 128(%esp)
	movaps	%xmm0, 112(%esp)
	movzbl	14(%esp), %eax
	movd	%eax, %xmm1
	movzbl	22(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm1, %xmm2
	movzbl	42(%esp), %eax
	movd	%eax, %xmm1
	movzbl	50(%esp), %eax
	movd	%eax, %xmm3
	punpcklbw	%xmm1, %xmm3
	punpcklbw	%xmm2, %xmm3
	movzbl	77(%esp), %eax
	movd	%eax, %xmm1
	movzbl	84(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm1, %xmm2
	movzbl	104(%esp), %eax
	movd	%eax, %xmm1
	punpcklbw	%xmm1, %xmm0
	punpcklbw	%xmm2, %xmm0
	movaps	%xmm0, %xmm1
	punpcklbw	%xmm3, %xmm1
	movzbl	127(%esp), %eax
	movd	%eax, %xmm0
	movzbl	135(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm0, %xmm2
	movzbl	155(%esp), %eax
	movd	%eax, %xmm0
	movzbl	163(%esp), %eax
	movd	%eax, %xmm3
	punpcklbw	%xmm0, %xmm3
	punpcklbw	%xmm2, %xmm3
	movzbl	188(%esp), %eax
	movd	%eax, %xmm0
	movzbl	197(%esp), %eax
	movd	%eax, %xmm2
	punpcklbw	%xmm0, %xmm2
	movzbl	217(%esp), %eax
	movd	%eax, %xmm4
	movzbl	225(%esp), %eax
	movd	%eax, %xmm0
	punpcklbw	%xmm4, %xmm0
	punpcklbw	%xmm2, %xmm0
	punpcklbw	%xmm3, %xmm0
	punpcklbw	%xmm1, %xmm0
	addl	$252, %esp
	ret

llvm-svn: 65311

llvm-svn: 64240

llvm-svn: 63852

The memory alignment requirement on some of the mov{h|l}p{d|s} patterns are 16-byte. That is overly strict. These instructions read / write f64 memory locations without alignment requirement.

llvm-svn: 63195

the same formatting as their corresponding SSE2 instructions, for
consistency.

llvm-svn: 61971

llvm-svn: 61211

llvm-svn: 60487

foldMemoryOperand how to "fold" them, by converting them into constant-pool
loads. When they aren't folded, they use xorps/cmpeqd, but for example when
register pressure is high, they may now be folded as memory operands, which
reduces register pressure.

Also, mark V_SET0 isAsCheapAsAMove so that two-address-elimination will
remat it instead of copying zeros around (V_SETALLONES was already marked).

llvm-svn: 60461

Fix lfence and mfence encoding. These look like MRM5r and MRM6r instructions except they do not have any operands. The RegModRM byte is encoded with register number 0.

llvm-svn: 57692

an unindexed load.

llvm-svn: 57612